ILEWG: Countdown to lift-off with Teijin Aramid!
With the world increasingly focusing its attention on reaching new space milestones and overcoming technical boundaries, the space industry is rapidly looking to upgrade its spacesuit technology. Specifically, spacesuits need better protection from the holes and scratches that are often caused by debris in space. Together with several partners, the International Lunar Exploration Working Group (ILEWG) is taking on this challenge, aiming to develop a spacesuit layer with a damage-detection system. Teijin Aramid’s Twaron® is proving an effective material for this prototype, thanks to its ballistic properties and conductivity – so stay tuned!
Protecting from debris, detecting damage
In space, any impact from debris can be life-threatening to astronauts. Micrometeorites, in particular, travel 17 kilometers per second on average – faster than a typical bullet shot. Traditional spacesuits have not provided enough protection from this debris – and if it punctures a spacesuit, it can release air or cut the skin, making the wearer even more vulnerable. To be truly safe, astronauts not only need protection from this debris, but to be alerted to any damage that does occur to their spacesuits. What’s more, spacesuits also need to be lighter and more comfortable.
To address these challenges, the ILEWG – a collaboration between several space agencies worldwide, including ESA, NASA, and CNES – is pioneering an impact-resistant extra-vehicular spacesuit layer with a damage-detection system. “This project is a joint effort with several partners, including Royal Academy of Art The Hague, EuroMoonMars, ArtMoonMars, and institutions in France, Austria, and Switzerland,” explains Jamal Ageli, spacesuit design coordinator ILEWG. “This collaborative, innovative project aligns perfectly with Teijin Aramid’s values,” adds Remko Pol, Global Market Manager Aerospace. “So, when the ILEWG contacted us in February 2020 to see whether Twaron®’s ballistic and conductive properties could help them in their mission, we were on board straight away!”
“With the spacesuit we are still in the earliest stages of this development, but we’re reaching for the moon.”
Twaron®: a multi-benefit solution
Indeed, these properties are both proving very useful. “Around 150 hexagonal patches of the Twaron® fabric we supply will be used in the suit layer,” explains Remko. As well as forming an impact protection layer, each patch will also act as a damage-detection sensor to alert astronauts to stretches, holes, and scratches. The conductive yarn will send electrical signals to an in-built computing unit that measures any changes to the current. For example, if there is a puncture, the loss of conductivity will alert the wearer to the affected area.
Combined with its low weight, these advantages make Twaron® an ideal material for this project. “We supplied fabric solutions made from our finest filament yarn, Twaron® Ultra Micro, for this prototype because they enable a high protection-to-comfort ratio,” explains Maria Persson, Senior R&D Textile Expert. “What’s more, by leveraging Twaron®’s high-performance properties alongside conductive yarn to create a smart textile solution, the ILEWG may be able to reduce the number of protective layers required, for even greater comfort and mobility.”
“To test the suit, astronauts will simulate space living for two weeks,assessing the suit’s comfort, performance, and power supply”
A well-suited partnership
As well as the high-performance advantages of Twaron®, the ILEWG has also benefited from Teijin Aramid’s support and advice. “Teijin Aramid is certainly proving to be a strong and reliable partner,” says Jamal. “From our very first meeting in Arnhem, they’ve been nothing but supportive. They’ve gone above and beyond, supplying us with extra fabric and specialized scissors, advising us on different types of Twaron® fabric, and answering any questions immediately. Above all, they believe in our vision, and they get straight to the point!”
Reaching for the moon
Now, the suit layer prototype is almost ready for testing – with Teijin Aramid’s logo proudly on the suit. “To test the suit, astronauts will simulate space living for two weeks, assessing the suit’s comfort, performance, and power supply,” explains Jamal. “We’re focusing initially on the electronics and basic performance, so we can demonstrate that the concept works.” The first round of tests will take place in the Alps in Switzerland, with future rounds planned in Hawaii, Iceland, and Poland.
With these tests in the pipeline, Teijin Aramid and the ILEWG are excited about what the future holds. “I’m really looking forward to continuing our partnership with Teijin Aramid, and I hope it lasts for a long time,” adds Jamal. “We are still in the earliest stages of this development, but we’re reaching for the moon – so stay tuned to find out more!”
For more detailed information, get in touch with Remko Pol (Global Market Manager Aerospace).