TechIce®: the future of rope
Abstract
What you'll learn in this Tech Talk
Show video transcript
Satyavan Hange (Teijin Aramid)
Hello everyone! My name is Satyavan Hange, Business Development Manager at Teijin Aramid, especially working on Technora® fibers, the premium para-aramid known for its exceptional performance in demanding applications. Over the past few years, I have been in close contact with offshore operators, system designers such as crane and the winch manufacturers and rope producers. As we know that across the industry, a major shift is happening.
Most of the projects, they are moving into deeper and deeper waters, and they are demanding higher payload at those water depths. Steel has been the industry standard for decades. It is strong, it is familiar and it's proven. However, it comes with its own limitation: excessive weight, handling complexities, corrosion and safety concerns.
That is the context for this video. We will explore whether fiber rope has become a serious engineering alternative to steel wire, and whether material selection and rope construction can make a meaningful difference in demanding applications. In this session, we will take a closer look at TechIce®, a compelling alternative to conventional steel wire. You will hear about everything from rope material, rope construction, to system engineering and real world applications, where TechIce® has successfully replaced steel wire in those deep-water projects.
This example leads to an exciting question: Can fiber rope finally replace steel wire? To help answer that question, I am pleased to welcome Bo and David. They will guide us through the technology, testing, practical experience and the certification journey behind TechIce®.
David (Hampidjan)
Thank you Satyavan. I am David from Hampidjan Iceland. Hampidjan is an industrial group based in Reykjavik in Iceland, active in 21 countries around the world. We are one of the biggest manufacturers in the world of high performance fiber ropes.
So what is TechIce®? TechIce® is a fiber rope made from synthetic fibers that can outperform steel wire in the most demanding applications. It's made from Technora® fiber with cover braided strands to increase its durability and robustness. It's a synthetic fiber rope that is supposed to act, feel, behave, and work like a steel wire on a winch.
So TechIce® is the fruit of the development over the last 25 years of DynIce® Warp. It was originally designed to replace steel wire on fishing vessels, in the most demanding application available. Vessels that are out 365 days almost a year. It has proven itself.
But what we have seen is that when we come to more demanding application for active heave and for CBoS purposes and for oil and gas, we see that the temperature buildup causes a problem. So material selection became the main way to improve on what we already have. How could we improve on the original rope? So in cooperation with Teijin Aramid, we have developed a rope which uses the same construction as our already proven warp.
But we replace the strength with Technora® which can withstand the most demanding applications. So in order to solve the challenges that came with more demanding applications where fiber rope was needed, we needed something more robust, something that could take the most demanding applications, that would withstand the challenges. Then we went into cooperation with Teijin Aramid, and have further improved on our original idea. So in cooperation with Teijin Aramid, we have created TechIce®, which is extremely robust.
It can work at any location around the world without having to worry about temperature, temperature buildup, ambient temperature or other things. And it simply works. In this slide, you can see some of the main properties of the rope, the benefits of the rope, like the covered strands and the excellent heat and creep resistance that it has compared to everything else available in the market today. TechIce® is proven to be the best in class of all synthetic ropes.
Bo
Thank you David. Now I will take you through a technical part which shows some tests, both in practice and in lab on TechIce® ropes. And my first example is that of an onshore construction yard in Malaysia, in a hot climate, where a direct replacement took place. So TechIce® was put on a construction crane in a normal operating environment.
It replaced steel wire rope. It ran on polymer sheaves. There was no cooling, and the lowest D/d was 22. The ropes performed for about 600 hoists, and then the rope was taken off the crane, and two rope sections were separated in order to check remaining strength.
One section was straight and it only had the payload, and one section had ropes that went on and off the sheave, so they saw bending cycles, and those rope specimens were tested further. We took that rope from the onshore crane test and it was brought to a testing lab in Germany, IFT in Stuttgart. And in their facilities they put the same rope specimens, from those sections, bent and unbent, on their CBoS machine to apply more cyclic bending. And actually the machine operated at slightly more demanding conditions.
D/d of 20 and a lower safety factor, and the speed was slightly lower due to limitations of the machine itself. On this graph, you see the elongation of the rope versus the elapsed cycles. And the dark curve shows the specimen that saw only tension, and the two other curves that are close to each other show the specimens that were bending on the sheaves. Here you can clearly see that the rope that only saw tension had several cycles more, and that that number at the end of the curve indicates that the rope really had a good lifetime ahead.
You can see a small hiccup near 8000 cycles, and that was due to an unexpected stop of the bending fatigue machine. After starting again, you can clearly see that the rope picked up where it was and the two curves of the rope on the bent section had about 18,000 cycles each lifetime, with a very similar elongation pattern, which shows how consistently the rope performed. Then other lab tests were done. And this slide shows a comparison between two rope types, both made by Hampidjan.
One is a DynIce® rope. It's entirely HMPE based, and the other one is the TechIce® rope with the Technora® covered strands. And in this test, which was evaluated at an independent lab in Norway, the climate was deliberately controlled at 43°C. You can see on the pictures the casing around the CBoS machine, and also a thermographic imaging camera was used to monitor the surface temperature of the rope during the test.
The table shows some typical rope properties, so we are looking at 30mm ropes. They were loaded at equal levels to represent the use case. The breaking loads of the ropes were slightly different. And the D/d was the same.
The test protocol furthermore imposed a maximum number of cycles of 50,000, and then the test would be stopped for remaining strength testing, and that is to limit the total experiment time. You can see in this graph that the elongation of both ropes follows an entirely different path. The DynIce® rope survived for about 28,000 - 29,000 cycles, and in the end of its lifetime, it rapidly elongated to an unacceptable level. The TechIce® rope actually was stopped after 50,000 cycles because that was part of the testing protocol.
And then the remaining strength was tested, and it showed a level of 66% of its original breaking strength. In order to make sure that these results were not just a one off, tests were repeated. And you can see that in this graph. So you see the rope IDs, among many other rope versions which all failed before those 50,000 cycles.
You see at the end, rope number 14 and 15, those were repeats of the TechIce® and the DynIce® rope. Let's take a look at the thermal performance of the ropes. So the thermographic data was compiled by the NORCE lab. And you see in those graphs at the left side the TechIce® rope and on the right side, the DynIce® rope.
The temperature profiles during the test. So the thermographic imager was stationary and it saw several parts of the rope passing by. The parts that are going on and off the sheave are hotter than the part that remains straight. So you see kind of a maximum/minimum combination of the entire lifetime of the rope.
Of course, for the TechIce®, it was stopped after 50,000 cycles in a steady state situation. The detailed graphs below with the letters A, B, C, and D for the respective ropes, show the temperature in the cycle halfway its lifetime. And at the bottom you will see the temperature curves at the end of the lifetime. And please note that the axis scales of those close ups are different.
So the TechIce® rope has a fairly constant maximum temperature, whereas the DynIce® rope goes even up to 90 °C near the end of its lifetime. So it really heats up due to the damage that occurred in the rope. This slide shows some close ups with the A, B, C, D letters for their respective ropes, and the positions halfway and at the end of the lifetime. And you see those cycles with different scales on the vertical axis.
Please take care to look at those maximum temperatures, because you see that the TechIce® rope has a very steady temperature. And the DynIce® rope will increase in temperature up to even 90°C near the end of its lifetime. The thermal imaging pictures that you see here also have varying scales, and they show you the typical graphical information that the rope surface provides during the test. And here you can get an idea of the distribution of the temperature.
So talking about temperature, I would like to take you along in why we believe that external cooling really bears a risk in rope operation. In this equation, you see the steady state temperature of the core of the rope and the composition in three terms. Let's assume that the rope heats up due to bending and friction. And there are basically all kinds of contributions that lead to a heat input in Watts per cubic meter.
That's the term q. And then if we can simplify and ignore any external sources like heat from a hot deck or sun irradiation, you can see that the core temperature is depending on the ambient temperature, a convective part in the equation, which is the second term, and the third term is more a volumetric part due to the conduction. And this equation clearly shows why cooling from the outside will not really solve your temperature problem. The core will lower in temperature, but only with the amount of the second term.
The contribution of the third term will not be affected. And this means that there is still a gradient in the rope which leads to different strength levels, and hence you get an unbalanced stress distribution in your rope, which will lead to a lower lifetime. We saw that the core temperature of the rope is important, but how can we measure it? Well, Hampidjan also developed a nice feature which is called Smart rope, and that's actually an optical fiber which is embedded in the core of a TechIce® rope.
And due to a combination of physical principles, Brillouin and Raman scattering, it enables the user to monitor both elongation and temperature almost real time, and the data transfer is done through the optical fiber itself. So the fiber is the sensor and the transporting medium at the same time. It is robust and an interrogator can be used to log all the data. So it can also really be used as a log of the rope use in the application.
This graph shows an example of a sensor output. So, we have a three-axis graph. On the X-axis you see the rope position, and almost half way the rope goes onto a sheave. Then there is a Y-axis showing the time domain, and on the vertical axis you see the actual temperature that is recorded.
So this graph clearly represents a transient state. So the rope starts to be exposed to cyclic bending and its temperature is rising with time. And the next graph shows a cross section at 25 minutes. And there you see clearly that the surface temperature that you would see from outside with a thermal imaging camera, for example, is just half of the core temperature.
So that clearly shows this temperature effect. And also that just cooling from the outside does not really bring anything in the core. No cooling is hence preferred, but it requires a heat resistant rope and that is a property that TechIce® possesses.
So, how about certification? Well TechIce® and its constituent fibers, the Technora® fibers, are Class Society Approved. We work with the DNV and we have E303 certificates in place for the Technora® fiber and TechIce® is about to be certified. We expect early 2027. This shows that TechIce® ropes comply with the criteria set by the regulatory bodies like DNV.
And that mainly revolves around 3-T. Time, Temperature, Tension, where we convincingly show that mainly tension is the factor to take into account for TechIce®. So time and temperature don't really play a decisive role. So it can stand heat and it resists creep.
David (Hampidjan)
Thank you, Bo. I wanted to take over again and mention some interesting applications where we have used our technology, used the benefit of these materials. First one I want to mention is Airseas, which is a spin-off originally from Airbus. They contacted Hampidjan and Teijin at the time and we developed for them a rope which is used in the most demanding application possible.
It's a tether for a system to save fuel for vessels, which is something we are extremely interested in. The rope has coax through and signals and some electricity through its core, and it has excellent tension-tension properties and long term fatigue resistance. Rope has proven to be working for the last 5-6 years without an issue.
Another project, which I find very interesting and shows the true benefits that are available with the TechIce® rope and its technology and the excellent properties of the material, is when our client Argeo contacted us, they had a big project in Africa. They had been using steel wire, and the project required them to go deeper than they could have done before. So they contacted us. We replaced the steel wire with like for like TechIce® rope in the same setup. Nothing was changed other than software, so they were able to actually do the job, they couldn't do it with steel wire.
They couldn't do it with other materials. They could do it with TechIce®. It was possible due to the properties of the material. So they used their existing gear, existing setup with minor software challenges and happy customer.
Stabbert Maritime are a Seattle-based company very active in the deep sea research, minerals and salvage operations worldwide. Recently did a deep sea, very deep sea operation 4600 m in active heave for 26 hours. That is the true benefit that TechIce® can offer you. It was a self-fleeting capstan winch from Parkburn. There is no rope, real rope monitoring.
We at Hampidjan were quite happy to work with the global industry led by Saipem and Technip, when they decided to make spare wellheads in case of something similar to the Deepwater Horizon incident happened again, as it did in 2010. So now the industry has come together and they have spare wellheads available, to cap wellheads immediately, or much faster than they were able to, to minimize the environmental impact of the industry. These systems come with our TechIce® as mooring ropes.
We at Hampidjan have been very happy to have been able to be part of this important joint venture, to be part of this important environmental project. And this shows the opportunities that we can help you with. You can use your existing gear. You don't have to invest in expensive new vessels or expensive cranes.
Bo
Okay, thank you, David. This brings us to the conclusions. So TechIce®, thanks to its covered strands, takes away any abrasion issues as a limiting factor. And by that the only failure mode is basically the rope’s bending lifetime which is governed by the tension and the layout of the hoisting system.
So we take two Ts out of three: Time and Temperature are no limiting factors anymore in your operations. TechIce® clearly outperforms steel, in depth and both in ease of handling. So we hope that you will see reasons to contact us and ask more about TechIce®.
Satyavan Hange (Teijin Aramid)
Thank you Bo, and thank you, David. At the beginning of the video I highlighted the challenges we continue to hear from the market. The operations are moving into deeper and deeper water, and steel wire weight is limiting payload capacity at those water depths. On top of that, we have seen corrosion, fatigue, and heat remain engineering concerns.
What we have just seen is the compelling engineering response to those challenges. TechIce® combines the advanced rope construction with Technora® fiber to deliver lightweight, heat resistant, creep resistant, robust, and durable rope. The real-world applications presented demonstrate that TechIce® has already been used in such demanding applications. The most important takeaway is that replacing steel wire is not simply selecting a lighter rope.
The rope material, the rope construction, and the integration of rope into a complete lifting system all play a critical role in achieving optimal performance. If you are designing a hoisting system for deepwater operations or working on a project where weight, corrosion, fatigue, creep or heat are limiting factors, we would be pleased to discuss your challenges and requirements. You can connect with us at information@teijinaramid.com or connect with us on LinkedIn. Both links are provided in the description below.
Thank you for watching.
Can fiber rope provide a serious engineering alternative to steel wire in demanding hoisting systems? In this Tech Talk, Teijin Aramid and Hampidjan examine how material selection, rope construction and system integration determine performance in offshore and deep-water (beyond 4600 m) lifting.
This session covers:
Why steel wire rope can limit offshore and deep-water hoisting operations
How TechIce® combines Technora® para-aramid fiber with an engineered rope construction
How heat, cyclic bending, creep and rope-system integration affect performance
How test data can support the certification of your rope
What we can learn from real-life examples in demanding lifting conditions
What engineers should consider when moving from steel wire to synthetic fiber rope
Contact the expert